FESTO ELGE-TB-35-300-0H-ST-M-H1-PLK-AA-AT-FR

Description

Drive pinion effective diameter 18.46 mm Working stroke 300 mm Size 35 Toothed belt elongation 0.094 % Toothed belt pitch 2 mm Mounting position Horizontal Guide Recirculating ball bearing guide Structural design Electromechanical linear axis with toothed belt With integrated drive Motor type Stepper motor Symbol 00997293 Position sensing Motor encoder For proximity sensor Homing Fixed stop block positive Fixed stop block, negative Rotor position sensor Absolute encoder, single-turn Rotor position sensor measuring principle Magnetic Temperature monitoring Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output Additional functions User interface Integrated end-position sensing Display LED Ready status indication LED Max. acceleration 8.5 m/s² Max. speed 1.2 m/s Repetition accuracy ±0.1 mm Characteristics of digital logic outputs Configurable Not galvanically isolated Duty cycle 100% Insulation protection class B Max. current of digital logic outputs 100 mA Max. current consumption 5300 mA DC nominal voltage 24 V Nominal current 5.3 A Parameterization interface IO-Link® User interface Rotor position sensor resolution 16 bit Permissible voltage fluctuations +/- 15 %
Power supply, type of connection Plug
Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
Power supply, number of pins/wires 4
Power supply, connection pattern 00995989
Certification RCM compliance mark
KC characters KC EMC
CE marking (see declaration of conformity) As per EU EMC directive
As per EU rohs directive
Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and
EN 60068-2-6
Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Storage temperature -20 °c … 60 °c
Relative air humidity 0 – 90 %
Degree of protection IP20
Protection class III
Ambient temperature 0 °c … 50 °c
Note on ambient temperature Above an ambient temperature of 30°c, the power must be reduced by
2% per K.
2nd moment of area Iy 3770 mm⁴
2nd moment of area Iz 4190 mm⁴
Max. force Fy 50 N
Max. force Fz 50 N
Max. feed force Fx 50 N
Guide value for payload, horizontal 2.8 kg
Feed constant 58 mm/U
Reference value, running performance 5000 km
Product weight 3990 g
Additional moving mass per 10 mm stroke 0.31 g
Number of digital logic outputs 24 V DC 2
Number of digital logic inputs 2
Logic input specification Based on IEC 61131-2, type 1
Work range of logic input 24 V
IO-Link®, SIO mode support Yes
Characteristics of logic input Configurable
Not galvanically isolated
IO-Link®, protocol version Device V 1.1
IO-Link®, communication mode COM3 (230.4 kBd)
IO-Link®, port class A
IO-Link®, number of ports Device 1
IO-Link®, process data width OUT 2 Byte
IO-Link®, process data content OUT 1 bit (move in)
1 bit (move out)
1 bit (quit error)
IO-Link®, process data width IN 2 Byte
IO-Link®, process data content IN 1 bit (state device)
1 bit (state move)
1 bit (state in)
1 bit (state out)
IO-Link®, service data contents IN 32 bit force
32 bit position
32 bit speed
IO-Link®, minimum cycle time 1 ms
IO-Link®, data memory required 500 byte Max. cable length 15 m outputs
15 m inputs
20 m for IO-Link® operation
Switching logic at outputs PNP (positive switching)
Input switching logic PNP (positive switching)
IO-Link®, Connection technology Plug
Logic interface, connection type Plug
Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
Logic interface, number of poles/wires 8
Logic interface, connection pattern 00992264
Profile material Wrought aluminum alloy, anodized
Note on materials Contains paint-wetting impairment substances
rohs-compliant
Drive cover material Wrought aluminum alloy, anodized
Belt pulley material High-alloy stainless steel
Slide material Wrought aluminum alloy, anodized
Toothed belt clamping component material Beryllium bronze
Toothed belt material Polychloroprene with glass cord and nylon coating