FESTO VSVA-B-M52-MZH-A1-1T1L-APX-0.5

Description

Valve function 5/2, monostable Actuation type Electrical Width 26 mm Standard nominal flow rate 1100 l/min Pneumatic working port Sub-base size 26 mm to iso 15407-2 G1/4 Operating pressure -0.09 MPa … 1 MPa Operating pressure -0.9 bar … 10 bar Structural design Piston gate valve Reset method Mechanical spring KC characters KC EMC CE marking (see declaration of conformity) As per EU EMC directive Degree of protection IP65 NEMA 4 Nominal width 9 mm Exhaust air function With flow control option Via throttle plate Via individual sub-base Sealing principle Soft Mounting position Any Manual override Non-detenting Type of control Pilot-controlled Pilot air supply port External Flow direction Any Symbol 00992813 Measuring principle Inductive Lap Overlap Sensor reverse polarity protection For all electrical connections Signal status display LED Switching position sensing Normal position with sensor Sensor switching status indication LED Pilot pressure MPa 0.3 MPa … 1 MPa Pilot pressure 3 bar … 10 bar Flow rate of pneumatic valve 1400 l/min Flow rate of pneumatic valve on individual sub-base 1200 l/min Optimized flow rate of pneumatic valve, pneumatically concatenated flow 1350 l/min Optimized flow rate of pneumatic valve pneumatically concatenated flow 1100 l/min
Switching time off 54 ms
On switching time 20 ms
Pneumatic valve – sensor ON switching time 60 ms
Pneumatic valve – sensor switching time off 11 ms
Duty cycle 100%
Max. positive test pulse with 0 signal 1200 µs
Max. negative test pulse on 1 signal 1100 µs
Nominal operating voltage DC 24 V
Switching output PNP
Coil characteristics 24 V DC: 1.6 W
Surge resistance 2.5 kV
Contamination level 3
Permissible voltage fluctuations +/- 10 %
Operating medium Compressed air as per iso 8573-1:2010 [7:4:4]
Information on operating and pilot media Operation with oil lubrication possible (required for further use)
Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and
EN 60068-2-6
Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Corrosion resistance class (CRC) 0 – No corrosion stress
Temperature of medium -5 °c … 50 °c
Relative air humidity 0 – 90 %
Noise level 85 dB(A)
Ambient temperature -5 °c … 50 °c
Max. tightening torque for valve mounting 1.8 Nm … 2.2 Nm
Product weight 281 g
DC sensor operating voltage range 10 V … 30 V
Sensor short circuit protection Pulsed
Sensor idle current ≤10 mA
Max. output current, sensor 200 mA
Sensor max. switching frequency 5000 Hz
Sensor residual ripple ± 10 %
Sensor voltage drop ≤2 V
Electrical connection 4-pin
Plug
as per iso 15407-2
Sensor connection Plug
Cable
4-pin
M12x1
0.5 m
Type of mounting On sub-base
Pilot air port 12/14 Sub-base, size 26 mm as per iso 15407-2
Pilot exhaust air port 82/84 Ducted
Not ducted
Optionally:
Pneumatic connection 1 Sub-base, size 26 mm as per iso 15407-2
Pneumatic connection 2 Sub-base, size 26 mm as per iso 15407-2
Pneumatic connection 3 Sub-base, size 26 mm as per iso 15407-2
Pneumatic connection 4 Sub-base, size 26 mm as per iso 15407-2
Pneumatic connection 5 Sub-base, size 26 mm as per iso 15407-2
Note on materials rohs-compliant
Seals material FPM
NBR
Housing material Die-cast aluminum
PA Material of screws Steel, galvanized
Switching element function N/C contact