FESTO VSVA-B-M52-MZ-A1-1C1-ANC

Description

Valve function 5/2, monostable Actuation type Electrical Width 26 mm Standard nominal flow rate 1100 l/min Pneumatic working port Sub-base size 26 mm to iso 15407-1 Sub-base size 01 to VDMA 24563 G1/4 Operating voltage 24V DC Operating pressure -0.09 MPa … 1.6 MPa Operating pressure -0.9 bar … 16 bar Structural design Piston gate valve Reset method Mechanical spring Certification C-Tick c UL us – Recognized (OL) KC characters KC EMC CE marking (see declaration of conformity) As per EU EMC directive Certificate issuing authority UL MH19482 UL MH19482 Degree of protection IP65 NEMA 4 Nominal width 9 mm Exhaust air function With flow control option Via throttle plate Via individual sub-base Sealing principle Soft Mounting position Any Conforms to standard iso 15407-1 VDMA 24563 Manual override Covered Type of control Pilot-controlled Pilot air supply port External Flow direction Any Symbol 00992813 Measuring principle Inductive Lap Overlap Sensor reverse polarity protection For all electrical connections Signal status display With accessories Switching position sensing Normal position with sensor Sensor switching status indication LED
Pilot pressure MPa 0.3 MPa … 1 MPa
Pilot pressure 3 bar … 10 bar
Flow rate of pneumatic valve 1400 l/min
Flow rate of pneumatic valve on individual sub-base 1100 l/min
Optimized flow rate of pneumatic valve pneumatically concatenated flow 1100 l/min
Switching time off 41 ms
On switching time 21 ms
Pneumatic valve – sensor ON switching time 60 ms
Pneumatic valve – sensor switching time off 11 ms
Duty cycle 100%
Max. positive test pulse with 0 signal 1000 µs
Max. negative test pulse on 1 signal 800 µs
Nominal operating voltage DC 24 V
Switching output NPN
Coil characteristics 24 V DC: 1.8 W
Permissible voltage fluctuations -15 % / +10 %
Operating medium Compressed air as per iso 8573-1:2010 [7:4:4]
Information on operating and pilot media Operation with oil lubrication possible (required for further use)
Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and
EN 60068-2-6
Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Corrosion resistance class (CRC) 0 – No corrosion stress
Temperature of medium -5 °c … 50 °c
Relative air humidity 0 – 90 %
Noise level 85 dB(A)
Ambient temperature -5 °c … 50 °c
Max. tightening torque for valve mounting 1.8 Nm … 2.2 Nm
Product weight 332 g
DC sensor operating voltage range 10 V … 30 V
Sensor short circuit protection Pulsed
Sensor idle current ≤10 mA
Max. output current, sensor 200 mA
Sensor max. switching frequency 5000 Hz
Sensor residual ripple ± 10 %
Sensor voltage drop ≤2 V
Electrical connection Form C
as per EN 175301-803
Without PE conductor
Sensor connection Cable
2.5 m
Type of mounting On sub-base
Pilot air port 12/14 Sub-base, size 26 mm as per iso 15407-1
Pilot exhaust air port 82/84 Ducted
Not ducted
Optionally:
Pneumatic connection 1 Sub-base, size 26 mm as per iso 15407-1
Pneumatic connection 2 Sub-base, size 26 mm as per iso 15407-1
Pneumatic connection 3 Sub-base, size 26 mm as per iso 15407-1
Pneumatic connection 4 Sub-base, size 26 mm as per iso 15407-1
Pneumatic connection 5 Sub-base, size 26 mm as per iso 15407-1
Pilot interface as per iso 15218
Note on materials rohs-compliant
Seals material FPM
NBR Housing material Die-cast aluminum
PA
Material of screws Steel, galvanized
Switching element function N/C contact