FESTO ELGS-BS-KF-32-600-8P-ST-M-H1-PLK-AA

Description

Working stroke 600 mm Size 32 Stroke reserve 0 mm Screw diameter 8 mm Spindle pitch 8 mm/U Mounting position Any Guide Recirculating ball bearing guide Structural design Electromechanical linear axis with ball screw With integrated drive Motor type Stepper motor Spindle type Ball screw drive Symbol 00997292 Position sensing Motor encoder For proximity sensor Homing Fixed stop block positive Fixed stop block, negative Rotor position sensor Absolute encoder, single-turn Rotor position sensor measuring principle Magnetic Temperature monitoring Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output Additional functions User interface Integrated end-position sensing Display LED Ready status indication LED Max. acceleration 5 m/s² Max. speed 0.18 m/s Repetition accuracy ±0.015 mm Characteristics of digital logic outputs Configurable Not galvanically isolated Duty cycle 100% Insulation protection class B Max. current of digital logic outputs 100 mA Max. current consumption 3000 mA DC nominal voltage 24 V Nominal current 3 A Parameterization interface IO-Link® User interface Rotor position sensor resolution 16 bit
Permissible voltage fluctuations +/- 15 %
Power supply, type of connection Plug
Power supply, connection technology M12x1, T-coded as per EN 61076-2-111
Power supply, number of pins/wires 4
Power supply, connection pattern 00995989
Certification RCM compliance mark
KC characters KC EMC
CE marking (see declaration of conformity) As per EU EMC directive
As per EU rohs directive
Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and
EN 60068-2-6
Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Storage temperature -20 °c … 60 °c
Relative air humidity 0 – 90 %
Degree of protection IP40
Protection class III
Ambient temperature 0 °c … 50 °c
Note on ambient temperature Above an ambient temperature of 30°c, the power must be reduced by
2% per K.
2nd moment of area Iy 38000 mm⁴
2nd moment of area Iz 45000 mm⁴
Max. force Fy 150 N
Max. force Fz 300 N
Fy with theoretical service life of 100 km (from a guide perspective only) 552 N
Fz with theoretical service life of 100 km (from a guide perspective only) 1104 N
Max. torque Mx 1.3 Nm
Max. torque My 1.1 Nm
Max. torque Mz 1.1 Nm
Mx with theoretical service life of 100 km (from a guide perspective
only)
5 Nm
My with theoretical service life of 100 km (from a guide perspective
only)
4 Nm
Mz with theoretical service life of 100 km (from a guide perspective only) 4 Nm
Max. feed force Fx 40 N
Guide value for payload, horizontal 2 kg
Guide value for payload, vertical 2 kg
Torsion moment of inertia It 1700 mm⁴
Feed constant 8 mm/U
Moving mass 83.4 g
Product weight 2329 g
Dynamic deflection (load moved) 0.05% of axis length, maximum 0.5 mm
Static deflection (load at standstill) 0.1 % of axis length
Number of digital logic outputs 24 V DC 2
Number of digital logic inputs 2
Logic input specification Based on IEC 61131-2, type 1
Work range of logic input 24 V
IO-Link®, SIO mode support Yes
Characteristics of logic input Configurable
Not galvanically isolated
IO-Link®, protocol version Device V 1.1
IO-Link®, communication mode COM3 (230.4 kBd)
IO-Link®, port class A
IO-Link®, number of ports 1 IO-Link®, process data width OUT 2 Byte
IO-Link®, process data content OUT 1 bit (move in)
1 bit (move out)
1 bit (quit error)
IO-Link®, process data width IN 2 Byte
IO-Link®, process data content IN 1 bit (state device)
1 bit (state move)
1 bit (state in)
1 bit (state out)
IO-Link®, service data contents IN 32 bit force
32 bit position
32 bit speed
IO-Link®, minimum cycle time 1 ms
IO-Link®, data memory required 500 byte
Max. cable length 15 m outputs
15 m inputs
20 m for IO-Link® operation
Switching logic at outputs PNP (positive switching)
Input switching logic PNP (positive switching)
IO-Link®, Connection technology Plug
Logic interface, connection type Plug
Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101
Logic interface, number of poles/wires 8
Logic interface, connection pattern 00992264
Material of end caps Die cast aluminum, painted
Profile material Wrought aluminum alloy, anodized
Note on materials Contains paint-wetting impairment substances
rohs-compliant
Cover strip material High-alloy stainless steel
Drive cover material Die cast aluminum, painted
Slide carriage material Steel
Guide rail material Steel
Slide material Die-cast aluminum
Spindle nut material Steel
Spindle material Steel