Festo PROX SENSOR SMT-10M-PS-24V-E-2,5-L-OE

Design for round slot
Conforms to standard EN 60947-5-2
Authorisation RCM Mark
CE mark (see declaration of conformity) to EU directive for EMC
KC mark KC-EMV
Special characteristics Oil resistant
Materials note Free of copper and PTFE
Conforms to RoHS
Halogen-free
Measured variable Position
Measuring principle Magnetoresistive
Ambient temperature -40 … 70 °C
Repetition accuracy 0.2 mm
Switch output PNP
Switching element function Normally open contact
Switch-on time <= 1.3 ms Switch-off time <= 1.4 ms Max. switching frequency 150 Hz Max. output current 100 mA Max. output current in mounting kits 50 mA Max. contact rating DC 2.8 W Max. switching capacity DC in mounting kits 1.5 W Voltage drop <= 1.7 V Short circuit strength Yes Overload withstand capability Available Nominal operating voltage DC 24 V Operating voltage range DC 5 ... 30 V Polarity protected for all electrical connections Electrical connection 1, connection type Cable Electrical connection 1, connection technology Open end Electrical connection 1, number of pins/wires 3 Connector exit direction axial Test conditions of cable Bending strength according to Festo standard Test conditions on request Chain link trunking: 5 million cycles, bending radius 28 mm Torsion resistance: > 300,000 cycles, ±270°/0.1 m
Cable length 2.5 m
Cable attribute Energy chain + robot
Material cable sheath TPE-U(PUR)
Mounting type Tightened
Insertable in slot from above
Max. tightening torque 0.4 Nm
Assembly position Any
Product weight 16.8 g
Material housing PA-reinforced
High alloy steel, non-corrosive
Operating status display Yellow LED
Ambient temperature with flexible cable installation -20 … 70 °C
Protection class IP65
IP68