Festo PROX SENSOR SME-10M-DS-24V-E-0,3-L-M8D

Design for round slot
Conforms to standard EN 60947-5-2
Authorisation C-Tick
CE mark (see declaration of conformity) to EU directive for EMC
Special characteristics Oil resistant
Materials note Free of copper and PTFE
Conforms to RoHS
Halogen-free
Measured variable Position
Measuring principle Reed magnetic
Ambient temperature -40 … 70 °C
Switch output with contact, bipolar
Switching element function Normally open contact
Switching output repetition accuracy in ± mm 0.1 mm
Switch-on time <= 1.2 ms Switch-off time <= 1 ms Max. switching frequency 50 Hz Max. output current 300 mA Max. output current in mounting kits 50 mA Max. contact rating AC 9 VA Max. contact rating DC 9 W Max. switching capacity DC in mounting kits 1.5 W Max. switching capacity AC in mounting kits 1.5 VA Voltage drop <= 1.5 V Short circuit strength No Overload withstand capability Not available Nominal operating voltage DC 24 V Operating voltage range AC 5 ... 30 V Operating voltage range DC 5 ... 30 V Polarity protected No Electrical connection 1, connection type Cable with plug Electrical connection 1, connection technology M8x1 A-coded to EN 61076-2-104 Electrical connection 1, number of pins/wires 3 Electrical connection 1, type of mounting Screw lock Connector exit direction axial Test conditions of cable Bending strength according to Festo standard Test conditions on request Chain link trunking: 5 million cycles, bending radius 28 mm Torsion resistance: > 300,000 cycles, ±270°/0.1 m
Cable length 0.3 m
Cable attribute Energy chain + robot
Material cable sheath TPE-U(PUR)
Mounting type Tightened
Insertable in slot from above
Max. tightening torque 0.4 Nm
Assembly position Any
Product weight 6.7 g
Material housing PA-reinforced
High alloy steel, non-corrosive
Operating status display Yellow LED
Ambient temperature with flexible cable installation -20 … 70 °C
Protection class IP65
IP68